Dell POWEREDGE M905 - Manual (Page 384)

372 QoS Commands
www
.dell.com | support.dell.com
Example
The following example displays how to add a match condition using the "snmp" port name
keyword.
console(config-classmap)#match srcl4port snmp
match vlan
Use the match vlan command in Class-Map Configuration mode to add to the specified class
definition a match condition based on the value of the layer 2 VLAN Identifier field. This field is
the only tag in a single tagged packet or the first or outer tag of a double VLAN packet.
Syntax
match vlan <vlan-id>
• <vlan-id>—Specifies a VLAN ID as an integer. (Range: 0 - 4095)
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays adding a match condition for the VLAN ID "2."
console(config-classmap)#match vlan 2
mirror
Use the mirror command in Policy-Class-Map Configuration mode to mirror all the data that
matches the class defined to the destination port specified.
Syntax
mirror interface
• interface—Specifies the Ethernet port to which data needs to be copied.
Default Configuration
This command has no default configuration.