Show ip igmp-proxy interface – Dell POWEREDGE M905 User Manual
Page 606
![background image](/manuals/620692/606/background.png)
610
IGMP Proxy Commands
www
.dell.com | support.dell.com
Example
The following example displays a summary of the host interface status parameters.
console#show ip igmp-proxy
Interface Index................................ vlan13
Admin Mode..................................... Enable
Operational Mode............................... Enable
Version........................................ 3
Number of Multicast Groups..................... 0
Unsolicited Report Interval.................... 1
Querier IP Address on Proxy Interface.......... 0.0.0.0
Older Version 1 Querier Timeout................ 0
Older Version 2 Querier Timeout................ 0
Proxy Start Frequency.......................... 1
show ip igmp-proxy interface
Use the show ip igmp-proxy interface command in Privileged EXEC mode to display a detailed list
of the host interface status parameters. It displays status parameters only when IGMP Proxy is
enabled.
Syntax
show ip igmp-proxy interface
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example fails to display status parameters because IGMP Proxy is not enabled.
console#show ip igmp-proxy interface
Interface Index................................ vlan13