Coin-cell battery, Removing the coin-cell battery, Replacing the coin-cell battery – Dell Alienware M11x R2 (Mid 2010) User Manual
Page 12
Back to Contents Page
Coin-Cell Battery
Alienware® M11x R2 Service Manual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
Removing the Coin-Cell Battery
1.
Follow the instructions in
Before You Begin
.
2.
Remove the base cover (see
Removing the Base Cover
).
3.
Remove the battery pack (see
Removing the Battery Pack
).
4.
Follow the instructions from
step 4
to
step 6
in
Removing the Hard Drive
.
5.
Remove the memory module(s) (see
Removing the Memory Module(s)
).
6.
Remove the hinge cover (see
Removing the Hinge Cover
).
7.
Remove the keyboard (see
Removing the Keyboard
).
8.
Remove the palm rest assembly (see
Removing the Palm Rest Assembly
).
9.
Disconnect the coin-cell battery cable from the connector on the system board.
10.
The coin-cell battery is glued to the system board. Using a plastic scribe, pry the coin-cell battery from the system board.
Replacing the Coin-Cell Battery
1.
Follow the instructions in
Before You Begin
.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery Pack
) before working inside the
computer.
1
coin-cell battery cable connector
2
coin-cell battery