Replacing the display assembly – Dell Alienware M11x R2 (Mid 2010) User Manual
Page 15
13.
Remove the four screws that secure the display assembly to the computer base.
14.
Gently slide the Mini-Card antenna cables out through the slot on the computer base.
15.
Lift the display assembly off the computer.
Replacing the Display Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Slide the antenna cables in through the slot on the computer base.
3.
Place the display assembly in position and replace the four screws that secure the display assembly to the computer base.
4.
Connect the display cable to the connector on the system board.
5.
Turn the computer over and route the Mini-Card antenna cables through the routing guides on the computer base.
6.
Connect the Mini-Card antenna cables to the Mini-Card(s).
7.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
8.
Replace the keyboard (see
Replacing the Keyboard
).
9.
Replace the hinge cover (see
Replacing the Hinge Cover
).
10.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
11.
Follow the instructions from
step 6
to
step 8
in
Replacing the Hard Drive
.
1
screws (4)
2
display cable connector
1
Mini-Card antenna cables