Replacing the i/o board – Dell Alienware M11x R2 (Mid 2010) User Manual
Page 24
Replacing the I/O Board
1.
Follow the instructions in
Before You Begin
.
2.
Align the connectors on the I/O board with the slots on the computer base.
3.
Use the pull-tab to align the connector on the I/O board with the connector on the system board and press gently.
4.
Replace the three screws that secure the I/O board to the computer base.
5.
Connect the speaker cable to the connector on the I/O board.
6.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
7.
Replace the keyboard (see
Replacing the Keyboard
).
8.
Replace the hinge cover (see
Replacing the Hinge Cover
).
9.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
10.
Follow the instructions from
step 6
to
step 8
in
Replacing the Hard Drive
.
11.
Replace the battery pack (see
Replacing the Battery Pack
).
12.
Replace the base cover (see
Replacing the Base Cover
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.