Understanding display messages, Checking display messages – Dell 1133 Laser Mono Printer User Manual
Page 6
1. Pressure lever
If you do not see the jammed paper, go to next step.
5. Pull the fuser cover levers down and remove the paper.
Return the fuser cover levers to their original position.
The fuser area is hot. Take care when removing paper from the machine.
6. Return the pressure levers to their original position.
7. Close the rear door.
8. Open and close front door, printing automatically resumes.
Understanding display messages
Messages appear on the control panel display to indicate the machine’s status or errors. Refer to the tables below to
understand the messages’ and their meaning, and correct the problem, if necessary.
Checking display messages
If a message is not in the table, reboot the power and try the printing job again. If the problem persists,
call for service.
When you call for service, provide the service representative with the contents of display message.
Some messages may not appear in the display depending on the options or models.
[error number] indicates the error number.
[tray type] indicates the tray number.
[media type] indicates the media type.
[media size] indicates the media size.
[color] indicates the color of toner or imaging unit.
Message
Meaning
Suggested solutions
Door Open.
Close it
The front cover is not securely latched.
Close the cover until it locks into place.
End of
lifeReplace
new cart
The indicated toner cartridge has reached its
estimated cartridge life. The printer stops
printing.
Estimated cartridge life means the
expected or estimated toner cartridge
Replace the toner cartridge (See