Cleaning your monitor, Environmental – Dell SP2008WFP Monitor User Manual
Cleaning Your Monitor
To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for
the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Use a slightly-dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.
If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.
Handle your monitor with care as darker
-colored monitor may scratch and show white scuff marks more than lighter-colored monitor.
To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.
Back to Contents Page
12.56 inches (319.2 mm)
18.62 inches (473.05 mm)
2.59 inches (65.9 mm)
11.69 inches (297.03 mm)
10.42 inches (264.84 mm)
5.8 inches (147.36 mm)
Weight with packaging
17.73 lbs (8.05 kg)
Weight with stand assembly and cables
15.49 lbs (7.03 kg)
Weight without stand assembly
(For wall mount or VESA mount considerations - no cables)
11.45 lbs (5.20 kg)
Weight of stand assembly
2.89 lbs (1.31 kg)
Refer to the operation conditions given below to use the monitor correctly.
5° to 35°C (41° to 95°F)
Storage: -20° to 60°C (-4° to 140°F)
Shipping: -20° to 60°C(-4° to 140°F)
10% to 80% (noncondensing)
Storage: 5% to 90% (noncondensing)
Shipping: 5% to 90%(noncondensing)
3,657.6m (12,000 ft) max
12,192 m (40,000 ft) max
256.08 BTU/hour (maximum)
129.75 BTU/hour (typical)
CAUTION: Read and follow the
before cleaning the monitor.
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.