Replacing the display assembly, 6 tighten the display cable grounding screw – Dell Inspiron 14R (N4110, Early 2011) User Manual
Page 56
Advertising
56
Display
Replacing the Display Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Place the display assembly in position and replace the four screws that
secure the display assembly to the computer base.
3 Route the display cable and Mini-Card antenna cables through the routing
guides.
4 Connect the display cable to the connector on the system board.
5 Connect the Mini-Card antenna cables to the Mini-Cards(s) (see
"Replacing the Mini-Card(s)" on page 47).
6 Tighten the display cable grounding screw.
1
display assembly
2
screws (4)
2
1
Advertising