Replacing the hard-drive assembly, 2 remove the new hard drive from its packaging, 3 place the hard drive in the hard-drive bracket – Dell Inspiron 14R (N4110, Early 2011) User Manual
Page 97
Advertising
Hard-Drive Assembly
97
Replacing the Hard-Drive Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
3 Place the hard drive in the hard-drive bracket.
4 Replace the four screws that secure the hard-drive bracket to the hard
drive.
5 Place the hard-drive assembly on the system board.
6 Slide the hard-drive assembly to connect it to the connector on the system
board.
7 Replace the screw that secures the hard-drive assembly to the system
board.
1
screws (4)
2
hard-drive bracket
3
hard drive
1
2
3
Advertising