Dell Inspiron 14R (N4110, Early 2011) - Manual (Page 74)

74 VGA Connector Board
Replacing the VGA Connector Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the connector on the VGA connector board with the slot on the
computer base.
3 Connect the display cable to the connector on the system board.
4 Replace the screw that secures the VGA connector board to the computer
base.
5 Replace the hinge cover (see "Replacing the Hinge Cover" on page 71).
6 Replace the display assembly (see "Replacing the Display Assembly" on
page 56).
7 Replace the palm-rest assembly (see "Replacing the Palm-Rest Assembly"
on page 35).
8 Replace the keyboard (see "Replacing the Keyboard" on page 29).
1 screw 2 display cable
2
1