Replacing the hinge caps, Display panel brackets, Removing the display panel brackets – Dell Inspiron 14R (N4110, Early 2011) User Manual

Page 62: Display brackets, Removing the display brackets

Advertising
background image

62

Display

Replacing the Hinge Caps

1 Follow the instructions in "Before You Begin" on page 9.
2 Align the tabs on the hinge caps with the slots on the display panel

brackets and snap them into place.

3 Turn the display panel over and place it on the display cover.
4 Replace the six screws that secure the display panel to the display cover.
5 Replace the display bezel (see "Replacing the Display Bezel" on page 58).
6 Replace the display assembly (see "Replacing the Display Assembly" on

page 56).

CAUTION:

Before turning on the computer, replace all screws and ensure that no

stray screws remain inside the computer. Failure to do so may result in damage to
the computer.

Display Panel Brackets

Removing the Display Panel Brackets

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the display assembly (see "Removing the Display Assembly" on

page 53).

1

display hinges (2) 2

hinge caps (2)

2

1

Advertising