Removing the base cover, Procedure – Dell Inspiron 23 (2350, Mid 2013) User Manual
Page 23
Advertising
Removing the Base Cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Remove the screws that secure the base cover to the computer base.
2 Loosen the captive screw that secures the base cover to the computer
base.
1
captive screw
2
base cover
3
screws (7)
3 Starting from the right side, pry up the base cover to release the ports on
the system board from the slots on the base cover.
23
Advertising