Removing the usb board, Prerequisites, Procedure – Dell Inspiron 23 (2350, Mid 2013) User Manual
Page 43
Advertising
Removing the USB Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the
.
2 Remove the
.
3 Follow the procedure from step 1 to step 4 in “Removing the
Procedure
1
Peel off the tape from the USB-board cable.
2 Open the clip of the USB-board cable routing.
3 Using the pull tab, disconnect the USB-board cable from the USB board
and remove it from the cable-routing clip.
4 Remove the screw that secures the USB board to the computer base.
43
Advertising