Removing the stand assembly, Prerequisites, Procedure – Dell Inspiron 23 (2350, Mid 2013) User Manual
Page 77
Advertising
Removing the Stand Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the
.
2 Remove the
.
3 Remove the
4 Remove the
.
5 Remove the
Procedure
1
Disconnect the converter-board cable from the converter board.
2 Disconnect the display-backlight cable from the converter board.
3 Gently release the antennas from the alignment posts on the display
bezel.
77
Advertising