Replacing the computer base, Procedure, Post-requisites – Dell Inspiron 23 (2350, Mid 2013) User Manual
Page 28
Replacing the Computer Base
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the display cables and antenna cables through the cable slot on the
computer base.
2 Place the computer base on the stand assembly and align the screw
holes on the computer base with the screw holes on the stand assembly.
3 Replace the screws that secure the computer base to the stand assembly.
4 Connect the display cables to the system board.
5 Connect the antenna cables to the wireless mini-card.
Post-requisites
28