Dell Inspiron 23 (2350, Mid 2013) - Manual (Page 76)

Replacing the Power-Button
Module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Place the power button in the display bezel and make sure that the
power button fits in the slot on the display bezel.
2 Adhere the Mylar over the power button.
3 Route the power-button module cable through its routing guide.
4 Connect the power-button cable to the control-buttons board cable.
5 Replace the screw that secures the power-button cable to the display
bracket.
Post-requisites
1 Replace the back cover .
2 Replace the computer base .
3 Replace the base cover .
76