Dell Inspiron 23 (2350, Mid 2013) - Manual (Page 57)

Removing the Processor
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover
2 Remove the computer base .
3 Remove the heat sink .
Procedure
1 Locate the processor on the system board.
See
system board components .
2 Using a Torx T8 screwdriver, loosen the ZIF-socket cam-screw.
3 Lift the processor off the ZIF socket.
1 Torx T8 screwdriver 2 processor
3 ZIF-socket 4 cam screw
57