Dell KVM 4322DS - Manual (Page 147)

LDAP Feature for the RCS xxx | xxx 137
Operation
KVM Appliance
Admin
KVM User Admin KVM User
Target
Device
Access
Yes – Permission
must be
configured for
each RCS by
including the RCS
in the appropriate
Group object in the
Directory. Yes – Permission
must be
configured for
each RCS by
including the RCS
in the appropriate
Group object in the
Directory.
Yes, if
configured by
Administrator.
Permission
must be
configured for
each target
device by
including the
TD in the
appropriate
Group object
in the
Directory.
Table 5.3: Allowed Operations by Access Level
An AD user account must be configured to receive RCS Administrator (KVM
Appliance Admin)permission before that account will be allowed to modify any
of the fields in the Authentication Panel. In particular, only an RCS
Administrator is allowed to modify the Authentication Settings.
Active Directory Object Overview for Standard Schema
For each of the physical RCSs on the network that you want to integrate with
Active Directory for Authentication and Authorization, you must create at least
one Computer Object to represent it. You will also need to create a computer
object for each SIP attached to the RCS that will be controlled using the KVM
User privilege level. Computer objects representing SIPs are not required for the
Administrator level groups. Users in the KVM User Group will only have access
to SIPs that are also in the KVM User Group. Users with Administrator
privileges will have access to all SIPs by default.
To set up the Group Objects for an RCS: