Dell KVM 4322DS - Manual (Page 81)

Local and Remote Configuration xxx | xxx 71
preemption level of users determines whether they may disconnect another user’s
serial or KVM session with a target device. Preemption levels range from 1 - 4,
with 4 being the highest level. For example, a user with a preemption level of 4
may preempt other level 4 users, as well as those with a level 1, 2, or 3 setting.
To change the Local Port User Authentication (Administrator only):
1 From the side navigation bar, select Ports - Local Port UI to open the
Local Port UI Settings screen.
2 Select or deselect the Disable Local Port User Authentication checkbox.
3 If Disable Local Port User Authentication is checked, select one of the
following options from the User Access Level drop-down menu: User, User
Administrator, or RCS Administrator.
4 Click Save.
Modem Settings
From the RCS Modem Settings screen, you can configure several modem
settings, as well as view the following modem settings: Local Address, Remote
Address, Subnet Mask, and Gateway.
For information on connecting your switch to a modem, see "Connecting the
RCS Hardware" on page 25.
To configure modem settings:
1 From the side navigation bar, select Ports - Modem to open the Modem
Settings screen.
2 Either enable or disable the Modem sessions can preempt digital sessions
checkbox.
3 Select an Authentication Timeout time from 30 to 300 seconds, and an
Inactivity Timeout time from 1 to 60 minutes.
4 Select Save.