Dell KVM 4322DS - Manual (Page 77)

Local and Remote Configuration xxx | xxx 67
target, the new SIP inherits the access control from that target. When a target
device is renamed, all the SIPs and outlets of that target are renamed, and they
carry forward the access control previously configured for the old target name.
Renaming of a Target Device
On the Target List - Overview page, the name for that target may be changed to
any unique target name. The name must be unique for the set of all targets,
including SIPs and power outlets. When a target is renamed, all outlets linked to
that target are also given the new target name.
Prioritized Status of Target Devices
On the Target List page, a target with linked power outlets controls multiple
devices. The Status value displayed for a target is chosen as the highest priority
of all the status values of the devices. The following table shows the possible
status values in priority order (highest to lowest) and the applicable target
device types.
Status Value Applicable for: Status Description
SIP
Power
Outlet
In Use x N/A A session is active
Path Blocked x N/A
Path to Target is in use by
another session
Upgrading x N/A SIP is being upgraded
Turning On N/A x
One or more outlets are turning
on
Turning Off N/A x
One or more outlets are turning
off
Table 3.4: Target Status Values