Hinge cover – Dell Latitude D630 User Manual

Page 152

Advertising
background image

152

Adding and Replacing Parts

Hinge Cover

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions in the

Product Information Guide.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as a

connector on the back of the computer).

NOTICE:

The hinge cover is fragile and can be damaged if extreme force is used.

Be careful when removing the hinge cover.

1 Follow the procedures in "Before You Begin" on page 149.
2 Turn the computer top-side up, and then open the display all the way (180

degrees) so that the display rests on your work surface.

NOTICE:

To avoid damaging the hinge cover, do not lift the cover on both sides

simultaneously. Removing the hinge cover in a different way than described may

cause the plastic to break.

3 Starting on the right side of the computer, use a plastic scribe to pry up the

hinge cover. Lift the cover away from the computer going from the right

toward the left, and lay the cover aside.

4 To replace the hinge cover, insert the left edge of the cover into place.

1

hinge cover

2

plastic scribe

3

indent

1

2

3

Advertising
This manual is related to the following products: