Dell Latitude D630 - Manual (Page 171)

Adding and Replacing Parts 171
NOTICE: Hard drives are extremely fragile; even a slight bump can damage the
drive.
NOTE: Dell does not guarantee compatibility or provide support for hard drives
from sources other than Dell.
To replace the hard drive in the hard drive bay:
1 Follow the procedures in "Before You Begin" on page 149.
NOTE: The number of hard drive screws may vary.
2 Remove the hard drive screws on the bottom of the computer.
NOTICE: When the hard drive is not in the computer, store it in protective antistatic
packaging. See "Protecting Against Electrostatic Discharge" in the Product
Information Guide
.
3 Slide the hard drive out of the computer.
4 Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE: Use firm and even pressure to slide the drive into place. If you use
excessive force, you may damage the connector.
5 Slide the hard drive into the bay until it is fully seated.
1 screws (2) 2 hard drive
1
2