Dell Latitude D630 - Manual (Page 133)

Intel ® Active Management Technology 133
• Set iAMT modes
• Set iAMT configuration modes
To view the MEBx setup screen, press <Ctrl-P > during system post or system
boot. Your default MEBx password is admin.
NOTE: To make configuration setting changes, the default MEBx password must be
changed.
Turning off iAMT
iAMT is enabled in the ME firmware by default. However, you may choose to
turn off the iAMT feature:
1 Press <Ctrl-P> to enter the MEBx setup and enter your password.
2 Select Intel
®
ME Configuration→ Intel ME Features Control→
Manageability Feature Selection
3 Select None.
4 Select Return to Previous Menu twice.
The changes are applied and the computer reboots.
USB Provisioning
iAMT can be provisioned using a USB key and Dell Client Manager. The USB
key must:
• Be formatted using the FAT16 file system with no system files
• Contain only the
setup.bin file
NOTE: The USB key should not be bootable.
To provision iAMT using a USB key, insert the USB key into a USB port prior to
boot. During POST, the BIOS displays a message, stating that the computer is
being provisioned.
Unsupported AMT Features
Your computer does not support all Intel iAMT chipset features, such as:
• Remote Firmware Update
• ASF
• Wake from ME