Dell Latitude D630 - Manual (Page 67)

Setting Up and Using Networks 67
For specific information about the wireless configuration utility installed on
your computer, see your wireless network documentation in the Windows Help
and Support Center (click Start→ Help and Support).
Completing the Connection to the WLAN
When you turn on your computer and a network (for which your computer is
not configured) is detected in the area, a pop-up appears near the network icon
in the notification area (in the lower-right corner of the Windows desktop).
Follow the instructions provided in any utility prompts that appear on your
screen.
Once you have configured your computer for the wireless network that you
selected, another pop-up notifies you that your computer is connected to that
network.
Thereafter, whenever you log on to your computer within the range of the
wireless network that you selected, the same pop-up notifies you of the wireless
network connection.
NOTE: If you select a secure network, you must enter a WEP or WPA key when
prompted. Network security settings are unique to your network. Dell cannot
provide this information.
NOTE: Your computer can take up to 1 minute to connect to the network.
Monitoring the Status of the Wireless Network Card Through Dell QuickSet
The wireless activity indicator provides you with an easy way to monitor the
status of your computer’s wireless devices. To turn the wireless activity indicator
on or off, click the QuickSet icon in the taskbar and select Hotkey Popups. If
Wireless Activity Indicator Off is not checked, the indicator is on. If Wireless
Activity Indicator Off is checked, the indicator is off.
The wireless activity indicator displays whether your computer’s integrated
wireless devices are enabled or disabled. When you turn the wireless networking
function on or off, the wireless activity indicator changes to display the status.
For more information about the Dell QuickSet wireless activity indicator, right-
click the QuickSet icon in the taskbar and select Help.