Dell Latitude D630 - Manual (Page 162)

162 Adding and Replacing Parts
NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the
connector.
4 Ground yourself and install the new memory module:
NOTE: If the memory module is not installed properly, the computer may not boot
properly. No error message indicates this failure.
a
Align the notch in the module edge connector with the tab in the
connector slot.
b Slide the module firmly into the slot at a 45-degree angle, and rotate
the module down until it clicks into place. If you do not feel the click,
remove the module and reinstall it.
1 securing clips (2 per connector) 2 memory module
2
1