Dell Compellent Series 40 - Manual (Page 12)

6 Storage Center System Setup Guide
Setting Up the Storage Center
Configuring a System via the Startup Wizard
After establishing a connection to Controller 1, use the Storage Center Startup Wizard for
the remainder of the setup. The Startup Wizard takes you through the following steps:
Step 1: Launch the Storage Center Startup Wizard on page 6
Step 2: License Agreement on page 7
Step 3: Load License on page 7
Step 4: Create Disk Folder on page 8
Step 5: Add Controller (dual-controller systems only) on page 13
Step 6: Time Settings on page 16
Step 7: System Setup on page 17
Step 8: Configure SMTP on page 18
Step 9: Update Setup on page 21
Step 10: User Setup on page 22
Step 11: Configure IO Cards (optional) on page 23
Step 12: Configure Ports on page 24
Step 13: Generate SSL Certificate on page 43
Step 1: Launch the Storage Center Startup Wizard
Note The Storage Center System Manager cannot load with the following unique
combination of applications: Windows 2008 (64 bit), FireFox 3.0, and Java Runtime
Environment 6_10.

To launch the Startup Wizard
1 Open a browser on a workstation or PC with an Ethernet connection to the controller.
The following browsers are supported:
• Microsoft Windows Internet Explorer Versions 7, 8, and 9
• Mozilla Firefox Version 3 on Microsoft Windows
2 Enter the eth0 IP address of Controller 1.
3 Click Yes to acknowledge the security alert.
Note Depending on your browser settings and Java version, additional security alerts
may appear.
4 Agree to any security alerts that are displayed by clicking Yes. The Storage Center login
window appears.