Dell Compellent Series 40 - Manual (Page 22)

16 Storage Center System Setup Guide
Setting Up the Storage Center
Step 6: Time Settings
The Time Settings step allows you to set the system time for the Storage Center.
Figure 10. Set Time
1 Set the system time:
• Region: Select the region in which the Storage Center is located.
• Time Zone: Select the time zone in which the Storage Center is located.
To configure time manually:
• Select Configure Time Manually, and enter the date and time.
To configure time using an NTP Time Server:
a Select Use NTP Time Server.
b Enter the name or IP address of an NTP server.
Note Accurate time synchronization is critical for replications. Make sure that Network
Time Protocol (NTP) is configured accurately. For more information, refer to:
http://
ntp.isc.org/bin/view/Support/WebHome .
2 When you have finished setting the system time, click Continue.