Dell Compellent Series 40 User Manual
Page 19
13
Configuring a System via the Startup Wizard
•
2 MB: (Default) Recommended for most application needs.
•
512 KB: Appropriate for applications with high performance needs or environments
in which Replays are taken frequently under heavy I/O. Selecting this size reduces
the amount of space the System Manager can present to servers.
•
4 MB: Appropriate for systems that use a large amount of disk space with infrequent
Replays.
5 Prepare for Non-Redundant Storage: Non-redundant storage does not protect data in
the event of a disk failure. Non-redundant storage uses RAID 0. Select Prepare for
Non-Redundant Storage only for data which is backed up in some other way.
6 Click Continue.
7 On the next window, click OK to confirm.
Step 5: Add Controller (dual-controller systems only)
The Add Controller step adds a second controller to a Storage Center.
Figure 7. Add Controller
If...
Then...
You are installing a second controller
Click Add Controller. The Controller Information dialog
appears. Go to
Controller IP Information on page 14
.
You are not installing a second controller
(you have a single-controller system)
Click Continue Setup. Go to