Dell Compellent Series 40 - Manual (Page 36)

30 Storage Center System Setup Guide
Setting Up the Storage Center
Figure 23. Edit Fault Domains (iSCSI)
2 Select a domain.
3 Click Edit Fault Domain again. The Fault Domain Properties - Domain <num> dialog
appears. From this dialog you can rename the fault domain and add any optional notes.
Figure 24. Fault Domain Properties (iSCSI)
4 Click OK to confirm your changes. The configuration is automatically validated.
5 If there are no warnings, click Continue to proceed with setup by going to Step 13:
Generate SSL Certificate on page 43 . If there are warnings, click Configure Local
Ports to modify the configuration and correct any issues that cause warnings. Refer to
Configuring Legacy Mode Local Ports – iSCSI, FC, and SAS on page 28 .

To create a new fault domain
1 Click Create Fault Domain. The Create Fault Domain dialog appears.