Dell Compellent Series 40 - Manual (Page 29)

23
Configuring a System via the Startup Wizard
Step 11: Configure IO Cards (optional)
The Configure IO Cards step allows you to configure iSCSI IO cards.
If the Storage Center detects iSCSI IO cards, the Startup Wizard displays information for
the IO cards. With Storage Center 5.5, network attributes for all iSCSI IO cards can now be
configured from a single screen instead of configuring cards one at a time on separate
screens. In addition, all cards are now configurable, not just those that are uninitialized.
Note All iSCSI IO Cards must be assigned static IP Address, Subnet Mask, and Gateway
values before the IO Cards can be used. Uninitialized iSCSI IO cards have an IP
Address of 0.0.0.0 and will be listed in a warnings window.
Figure 17. iSCSI IO Cards Detected
1 To skip this step and configure later, click Skip iSCSI IO Card Configuration.
Note Although the dialog presents an option to skip configuration, it is recommended that
iSCSI IO cards are configured at this step.
2 Click Continue.
• If no errors or warnings are generated, iSCSI IO card configuration is saved. Go to
Step 12: Configure Ports on page 24 .
• If there are errors and/or warnings, they are displayed as shown Figure 18 on
page 24.