Dell Dimension L___cx - Manual (Page 120)

B-6 Dell Dimension L Series Systems Reference and Troubleshooting Guide
Boot Configuration Submenu
Figure B-3. Boot Configuration Submenu
Table B-4. Boot Configuration Submenu Options
Option Function
Plug & Play & Play
O/S
Determines whether the system is configured to support
Plug and Play devices from the operating system or from the
system BIOS. Leave this option set to No so the BIOS
handles all Plug and Play operation.
NOTE: Be sure this option is set to No before running the
Dell Diagnostics. Otherwise, some diagnostics
diagnostics tests may
incorrectly fail.
Reset Config Data Permits resetting Plug and Play configuration data to default
values. Yes resets the data; No (default) retains the current
Plug and Play settings. If set to Yes, configuration data
reverts to default values the next time the system boots.
This option automatically reverts back to the No setting.
Numlock Selects power-on state for Numlock.
NOTE: The Glossary in the system Help defines abbreviations and acronyms.