Dell Dimension L___cx - Manual (Page 136)

C-4 Dell Dimension L Series Systems Reference and Troubleshooting Guide
A PCI bus failure has
occurred. Remove all expansion cards and
restart the system to determine
if a resource conflict exists. If a
conflict exists, resolve the con-
flict as described in "Resolving
Software and Hardware Incom-
patibilities" in Chapter 5. If the
5. If the
problem still persists, refer to
Chapter 7, "Getting Help," for
instructions on obtaining techni-
cal assistance.
The video controller
failed to initialize or
respond. Refer to Chapter 7, "Getting
Help," for instructions on obtain-
ing technical assistance.
An IDE bus failure has
occurred. Reseat the EIDE cables. If the
problem persists, refer to
Chapter 7, “Getting Help,” for
instructions on obtaining techni-
cal assistance.
The USB port or a USB port or a
device connected to it
has failed initialization.
Disconnect the device from the
USB port. If the problem per-
sists, refer to Chapter 7, “Getting
Help,” for instructions on
obtaining technical assistance.
Other failure. Refer to Chapter 7, “Getting
Help,” for instructions on
obtaining technical assistance.
System has started and
turned over control to
the operating system. No action is necessary.
Table C-1. Diagnostic Codes (continued)
Diagnostic Code Definition Corrective Action
NOTE: The Glossary in the system Help defines abbreviations and acronyms.
A B C D
A B C D
A B C D
A B C D
A B C D
A B C D