Dell Dimension L___cx - Manual (Page 123)

support.dell.com System Setup Program B-9 9
Primary IDE Master Submenu
Figure B-6. Primary IDE Master Submenu
Primary IDE
Master Identifies the first drive attached to the primary EIDE inter-
face, usually the boot hard-disk drive. Refer to “Primary IDE
k drive. Refer to “Primary IDE
Master Submenu” found later in this appendix.
Primary IDE Slave Identifies the second drive attached to the primary EIDE
interface, if there is one. The format of this submenu is the
same as the one described in “Primary IDE Master
Submenu” found later in this appendix.
Secondary IDE
Master Identifies the first drive attached to the secondary EIDE
interface, usually a CD-ROM
CD-ROM drive. The format of this sub-
menu is the same as the one described in “Primary IDE
Master Submenu” found later in this appendix.
ppendix.
Secondary IDE
Slave Identifies the second drive attached to the secondary EIDE
interface, usually a Zip or tape drive. The format of this sub-
menu is the same as the one described in “Primary IDE
Master Submenu” found later in this appendix.
Table B-6. IDE Configuration Submenu Options (continued)
Option Function
NOTE: The Glossary in the system Help defines abbreviations and acronyms.