Replacing the ac adapter connector – Dell Inspiron Mini 10v (1018, Mid 2010) User Manual
Page 10
Replacing the AC Adapter Connector
1.
Follow the instructions in
Before You Begin
.
2.
Place the AC adapter connector in the computer base.
3.
Route the AC adapter connector cable through the routing guide and connect the cable to the connector on the system board.
4.
Replace the I/O board (see
Replacing the I/O Board
).
5.
Replace the support brackets (see
Replacing the Support Brackets
).
6.
Replace the display assembly (see
Replacing the Display Assembly
).
7.
Replace the middle cover (see
Replacing the Middle Cover
).
8.
Replace the Mini-Card (see
Replacing the Mini-Card
).
9.
Replace the memory module (see
Replacing the Memory Module
).
10.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
11.
Replace the hard-drive assembly (follow the instructions from
step 5
to
step 7
in
Replacing the Hard Drive
).
12.
Replace the keyboard (see
Replacing the Keyboard
).
13.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.