Dell Inspiron Mini 10v (1018, Mid 2010) - Manual (Page 16)

7. Gently peel off the display cable from the display panel.
Replacing the Display Cable
1. Follow the instructions in Before You Begin .
2. Adhere the display cable along the edge of the display panel.
3. Connect the display cable to the connector on the display panel.
4. Replace the display panel (see Replacing the Display Panel ).
5. Replace the display bezel (see Replacing the Display Bezel ).
6. Replace the display assembly ( Replacing the Display Assembly ).
Display Panel Brackets
Removing the Display Panel Brackets
1. Follow the instructions in Before You Begin .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Remove the display bezel (see Removing the Display Bezel ).
4. Remove the display panel (see Removing the Display Panel ).
1 display cable 2 pull-tab
3 display-cable connector
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.