Middle cover, Removing the middle cover – Dell Inspiron Mini 10v (1018, Mid 2010) User Manual
Page 20
Back to Contents Page
Middle Cover
Dell™ Inspiron™ 1018 Service Manual
Removing the Middle Cover
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the two screws that secure the middle cover to the computer base.
4.
Using a plastic scribe, gently pry out the middle cover and remove it from the computer base.
5.
Lift the middle cover off the computer.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.