Speaker, Removing the speaker, Replacing the speaker – Dell Inspiron Mini 10v (1018, Mid 2010) User Manual
Page 39
Back to Contents Page
Speaker
Dell™ Inspiron™ 1018 Service Manual
Removing the Speaker
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Remove the hard-drive assembly (follow the instructions from
step 4
to
step 6
in
Removing the Hard Drive
).
5.
Remove the palm rest assembly (see
Removing the Palm Rest Assembly
).
6.
Remove the memory module (see
Removing the Memory Module
).
7.
Disconnect the speaker cable from the connector on the system board.
8.
Remove the two screws that secure the speaker to the computer base.
9.
Remove the speaker and the cable from the computer base.
Replacing the Speaker
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1 speaker cable connector
2 speaker cable
3 screws (2)
4 speaker