Dell Inspiron Mini 10v (1018, Mid 2010) - Manual (Page 17)

5. Remove the four screws (two on each side) that secure the display panel brackets to the display panel.
6. Remove the display panel brackets off the display panel.
Replacing the Display Panel Brackets
1. Follow the instructions in Before You Begin .
2. Place the display panel brackets in position.
3. Replace the four screws (two on each side) that secure the display panel brackets to the display panel.
4. Replace the display panel (see Replacing the Display Panel ).
5. Replace the display bezel (see Replacing the Display Bezel ).
6. Replace the display assembly (see Replacing the Display Assembly ).
Back to Contents Page
1 display panel brackets (2) 2 screws (4)
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.