Removing the fan, Replacing the fan – Dell Vostro 1310 (Early 2008) User Manual
Page 23
Back to Contents Page
Fan
Service Manual
Removing the Fan
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Remove the M2.5 x 5-mm screw that secures the memory cover.
3.
Remove the memory cover.
4.
Remove the two M2.5 x 5-mm screws that secure the fan to the base of the computer.
5.
Disconnect the fan connector from the system board connector, and remove the fan.
Replacing the Fan
1.
Align the screw holes on the fan with the holes on the base of the computer.
2.
Replace the two M2.5 x 5-mm screws to secure the fan to the base of the computer.
3.
Connect the fan connector to the system board connector.
4.
Replace the memory cover.
5.
Replace the M2.5 x 5-mm screw that secures the memory cover.
Back to Contents Page
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1 M2.5 x 5-mm screws (2) 2 fan
3 fan connector
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE:
This procedure assumes that you have completed the removal procedure first.