Dell Vostro 1310 (Early 2008) User Manual
Page 47
1.
Position the DC power module in the computer and connect the DC- power module connector to the system board.
2.
Replace the system board (see
Replacing the System Board Assembly
).
3.
Replace the USB daughter card (see
Replacing the USB Daughter Card
).
4.
Replace the optical drive (see
Replacing the Optical Drive
).
5.
Connect the cable that secures the card with Bluetooth wireless technology to the system board (see
Replacing the Card
).
6.
Replace the palm rest (see
Replacing the Palm Rest
).
7.
Replace the display assembly (see
Replacing the Display Assembly
).
8.
Replace the keyboard (see
Replacing the Keyboard
).
9.
Replace the hinge cover (see
Replacing the Hinge Cover
).
10.
Replace the fan (see
Replacing the Fan
).
11.
Replace the WLAN card (see
Replacing a WLAN Card
).
12.
Replace the hard drive (see
Replacing the Hard Drive
).
Back to Contents Page
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE:
This procedure assumes that you have completed the removal procedure first.