Dell PowerEdge C5220 - Manual (Page 79)

Installing System Components 79
Heat Sinks
The following procedure as illustrated with an air shroud only applies to the
12-sled SKU system(Table 3-1). The 8-sled SKU does not require an air
shroud.
Removing a Heat Sink/Shroud
1 Remove the required sled from the system. See "Sled Configuration" on
page 61.
2 Loosen the four captive screws on the heat sink .
Table 3-1. Processors Requiring an Air Shroud on C5220 12-Sled SKU
Series Processor
Intel Xeon E3-1200v2
product family
Intel Xeon E3-1280v2
Intel Xeon E3-1270v2
Intel Xeon E3-1240v2
Intel Xeon E3-1230v2
Intel Xeon E3-1220v2
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.