Dell PowerEdge C5220 - Manual (Page 99)

Troubleshooting 99
4
Troubleshooting
Troubleshooting Sequence
Server Boot Issues
System Does Not Boot After Initial Installation
Power Connector Not Plugged In
Memory Issues
Monitor Issues
Power Supply and Chassis Issues
Cable Issues
Electrical Short or Overload
Defective Components
System Does Not Boot After Configuration Changes
Hardware Changes
Software Changes
BIOS Changes
Viewing System Event Logs for Investigation
Installation Problems
Troubleshooting External Connections
System Does Not Boot After Initial Installation
Power Connector Not Plugged In
If the power supply cable is not plugged into the system board processor
power connector, the system cannot boot up, even though chassis front panel
LEDs and the fan may be operational. Verify that the power connections are
good.