Dell XPS/Dimension XPS Gen 5 - Manual (Page 112)

112
Removing and Installing Parts
www
.dell.com | support.dell.com
b On the retention base locate the
tab opposite the power supply.
Press on the retention base tab
until the heat sink pops up
slightly.
c Press out on the second retention
tab while lifting the heat sink up
and out of the retention base.
NOTICE:
Lay the heat sink down on its
side.
NOTICE:
If you are installing a processor
upgrade kit from Dell, discard the original
heat sink. If you are not installing a
processor upgrade kit from Dell, reuse the
original heat sink and blower when you
install your new processor.
6 Push down and out on the socket
release lever.
heat sink
retention base
retention tab
D8659bk0.book Page 112 Thursday, March 10, 2005 10:18 AM