Dell XPS/Dimension XPS Gen 5 - Manual (Page 91)

Removing and Installing Parts
91
5 If you are removing the adapter permanently, install a filler bracket in the empty card-slot
opening.
If you need a filler bracket, contact Dell (see
page 139 ).
NOTE:
Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification
of the computer. The brackets also keep dust and dirt out of your computer.
6 Lower the retention arm and press it into place, securing the card(s) in the computer.
NOTICE:
To connect a network cable, first plug the cable into the network wall jack, and then plug it into
the computer.
7 Close the computer cover, reconnect the computer and devices to electrical outlets, and then
turn them on.
Drives
Your computer supports a combination of these devices:
• Up to three hard drives
• Optional floppy drive
• Up to two CD or DVD drives
• Optional media card reader
D8659bk0.book Page 91 Thursday, March 10, 2005 10:18 AM