Replacing the camera module – Dell Inspiron 14R (N4010, Early 2010) User Manual
Page 11
Replacing the Camera Module
1.
Follow the instructions in
Before You Begin
.
2.
Connect the camera cable to the connector on the camera module. Replace the tape to secure the camera cable to the camera module.
3.
Align the slots on the camera module with the alignment guides on the display cover.
4.
Adhere the camera module on the display cover.
5.
Replace the display panel (see
Replacing the Display Panel
).
6.
Replace the display bezel (see
Replacing the Display Bezel
).
7.
Replace the display assembly (see
Replacing the Display Assembly
).
8.
Replace the palm rest (see
Replacing the Palm Rest
).
9.
Replace the keyboard (see
Replacing the Keyboard
).
10.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
11.
Replace the module cover (see
Replacing the Module Cover
).
12.
Follow the instructions from
step 4
to
step 5
in
Replacing the Optical Drive
.
13.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1 camera
module
2 camera cable
connector
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.