Dell Inspiron 14R (N4010, Early 2010) - Manual (Page 25)

Hinge Caps
Removing the Hinge Caps
1. Follow the instructions in Before You Begin .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Remove the display bezel (see Removing the Display Bezel ).
4. Remove the display panel (see Removing the Display Panel ).
5. Remove the display hinges (see Removing the Display Hinges ).
6. Press both sides of each hinge cap and lift the hinge caps out of the display hinges.
Replacing the Hinge Caps
1. Follow the instructions in Before You Begin .
2. Place the hinge caps on the display hinges and snap them into place.
3. Replace the display hinges (see Replacing the Display Hinges ).
4. Replace the display panel (see Replacing the Display Panel ).
5. Replace the display bezel (see Replacing the Display Bezel ).
6. Replace the display assembly (see Replacing the Display Assembly ).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
1 hinge caps (2) 2 display hinges (2)