Speakers, Removing the speakers, Replacing the speakers – Dell Inspiron 14R (N4010, Early 2010) User Manual
Page 49
Back to Contents Page
Speakers
Dell™ Inspiron™ N4010 Service Manual
Removing the Speakers
1.
Follow the instructions in
Before You Begin
.
2.
Follow the instructions from
step 2
to
step 15
in
Removing the System Board
.
3.
Remove the four screws (two on each speaker) that secure the speakers to the computer base.
4.
Make a note of the speakers cable routing and lift the speakers along with the cable, off the computer base.
Replacing the Speakers
1.
Follow the instructions in
Before You Begin
.
2.
Place the speakers on the computer base and route the speakers cable.
3.
Replace the four screws that secure the speakers to the computer base.
4.
Follow the instructions from
step 6
to
step 20
in
Replacing the System Board
.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
speakers (2)
2
screws (4)
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.