Replacing the palm rest – Dell Inspiron 14R (N4010, Early 2010) User Manual
Page 45
Replacing the Palm Rest
1.
Follow the instructions in
Before You Begin
.
2.
Slide the tabs on the palm rest into the slots on the middle cover and gently snap the palm rest into place.
3.
Connect the touch pad cable and the power button cable to the connectors on the system board.
4.
Replace the keyboard (see
Replacing the Keyboard
).
5.
Replace the fourteen screws that secure the palm rest to the computer base.
6.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
7.
Replace the module cover (see
Replacing the Module Cover
).
8.
Follow the instructions from
step 4
to
step 5
in
Replacing the Optical Drive
.
9.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1 power button cable connector
2 touch pad cable connector
3 palm rest
4 plastic scribe
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.