Dell PowerVault ML6000 - Manual (Page 70)

66 SMI-S Common Protocol Interface Specification
Table 63 Required Server Level Instances of SCSIProtocolController
Table 64 Required Properties of SCSIProtocolEndpoint
Property Drive Instances (one for each direct-attached drive)
SystemCreationClassName[key] “CIM_ SCSIProtocolController”
SystemName[key] IP
CreationClassName[key] “CIM_ComputerSystem”
DeviceID[key] ”D:<GUID>:<serial>:<vendor> <fwr>:<SPE DeviceID>”
MaxUnitsControlled 2048
ElementName “SMIS_SCSIProtocolController”
OperationalStatus[valuemap] {Unknown(0)}
Caption Same as DeviceID
Description “Tape Drive <Type>” where <Type> is SCSI/FC/SAS
OtherIdentifyingInfo {<serial>}
IdentifyingInfoDescriptions {“Serial Number”}
Property Type Description/Notes
Comments/
Remarks
SystemCreationClassName[key] string,
MaxLen(256) The scoping System's
CreationClassName.
SystemName[key] string The scoping System's Name. Library’s host
name.
CreationClassName[key] string Indicates the name of the
class or subclass used in the
creation of an instance.
DeviceID[key] string ,
MaxLen(256) Opaque
MaxUnitsControlled Uint32 Maximum number of units
controlled by this
ProtocolController (optional)
ElementName String User-friendly name
OperationalStatus[valuemap] Uint16[] Status of device (optional)
Caption String (optional)
Description String (optional)
ConnectionType [valuemap] Uint16 Fibre/ISDN/…
Role [valuemap] Uint16 Target/Initiator…
ProtocolIFType [valuemap] Uint16 Protocol Interface.