Dell PowerVault ML6000 - Manual (Page 81)

Dell PowerVault ML6000 SMI-S Reference Guide 77
Fibre Channel Blade Support
This support for Fibre Channel blades is provided through objects belonging to the following SMI-S
subprofiles:
• The Multiple Computer System Subprofile
• The Masking Mapping Profile
As of 1.2.0, these subprofiles are not supported by the Storage Media Library profile, and so the Dell
PowerVault ML6000 does not show support for them in the Profile Registration Subprofile.
The diagram below shows the library object model with blade support. The objects or instances that were
added for blade support are shown in blue, and they are discussed in more detail in the following sections.
Figure 6 Library Object Model with Blade Support
FCPort
TapeDrive
(Direct attached drive)
ChangerDevice
System
Device
LimitedAccessPort
StorageMediaLocation
(Drive)
ComputerSystem
Realizes
Realizes
Realizes
Physical Tape
Physical Tape
PhysicalPackage
(Drive)
Chassis
ComputerSystemPackage
Location
PhysicalElementLocation
ConfigurationCapacity
ElementCapacity
Product
ProductPhysicalComponent
PackageInChassis
PackagedComp
SCSIProtocolController
(Tape Drive SPC)
FCPort
SCSIProtocolEndpoint
(Drive port)
PortImplementsEndpoint
ProtocolControllerForPort
SAPAvailableForElement
Protocol
Controller
ForUnit
SystemDevice
SCSIProtocolController
(Blade zone SPC)
TapeDrive
(Drive behind blade)
Realizes
SCSIProtocolEndpoint
SCSIProtocolEndpoint
(Blade port)
ComputerSystem
(Blade)
System
Device
System
Device
Protocol
Controller
ForUnit
FCPort
m
e
ProtocolControllerForPort
SAPAvailableForElement
PortImplementsEndpoint
Realizes
StorageMediaLocation
(Storage) StorageMediaLocation
(Accessor)
StorageMediaLocation
(IE)
StorageMediaLocation
(Drive behind blade)
Physical
Media
InLocation
Conta
ComponentCS
ComputerSystemPackage
SASPort SPIPort
SCSIProtocolEndpoint
(Drive port)
SCSIProtocolEndpoint
(Drive port)
PortImplementsEndpoint
SCSIProtocolController
(Tape Drive SPC)
SCSIProtocolController
(Tape Drive SPC)